What Drives Roof Replacement Cost in Shreveport
A new roof is priced by the pieces that go into it, not by one flat number. The ranges below come from this site's own service pages. Treat them as typical figures, not as a quote. Roof size, slope, layers and the condition of the wood decide where your job lands.
Material sets the baseline
Material is the biggest single choice. Typical ranges for a full replacement:
- Asphalt shingle roof: $8,000 to $16,000. The most common material. The price varies with roof size.
- Metal roof: $15,000 to $40,000. Higher up front. The panel style changes the price.
- Tile or slate roof: $20,000 to $50,000. These roofs are heavy, so the framing may need a check.
Many homes in Shreveport are single-story ranches on a slab. Those roofs are often wide and fairly easy to work on, which can keep labor more predictable. Brick and vinyl siding do not change the roof price much, but the way the roof meets the wall can add flashing work.
Line items that stack on top
The material range is rarely the whole bill. Ask whether each of these is inside the quote or listed separately:
- Tear-off and disposal: $1,000 to $3,500. Extra layers add labor and dump fees.
- Deck board repair: $300 to $2,500. It depends on how much wood is rotted.
- Permit and inspection: $100 to $500. It is set by the city, so ask if it is in the quote.
The deck line is the one that surprises people. Nobody can see the wood until the old roof is off. In a humid climate with long wet stretches, slow leaks can soften boards over time. A fair quote says how rotted boards are priced if they turn up, and who approves the extra cost before work continues.
Talk to a provider (318) 522-7001
Local factors that shift the number
These do not have a price tag here, but they change quotes from one house to the next:
- Roof size and number of slopes. More hips, valleys and dormers mean more cutting and more flashing.
- Pitch and access. Steeper roofs need more safety gear and slow the crew down.
- Attic heat and ventilation. Gulf Coast attics get very hot. Adding or correcting vents can add cost, but it matters for how long shingles last.
- Older pier-and-beam houses. Older framing can be out of square, and old decking may be thin or spaced apart. That can raise prep work.
- Storm details. Tropical storm season makes nailing pattern, underlayment and edge metal worth discussing.
- Timing. After a large storm, demand rises and crews book out. Rushed quotes deserve a second look.
Paying more now, or less now
The ranges show a real trade-off. Asphalt shingles cost less up front. Metal costs more up front and is chosen by many owners for a longer service life. Tile and slate sit at the top of the range and add weight to the structure.
None of these is right for everyone. If you plan to sell within a few years, a mid-range asphalt roof may make sense. If this is a long-term home, it can be worth pricing metal beside asphalt and asking each provider to explain the difference in writing.
How to compare written quotes
Get at least three written quotes for the same job. Side by side, the differences become visible. Check these points:
- Are the material, brand line and color the same?
- Are tear-off, disposal and cleanup included?
- How is rotted decking handled and priced?
- Are flashing, drip edge, vents and underlayment listed?
- Who pulls the permit, and is the fee in the total?
- What does the workmanship warranty cover, and who stands behind it?
A lower total is not always a better deal. It may leave out some of the lines above. A higher quote that is fully itemized can be the fairer one. Ask each provider for proof of its license and insurance coverage before you sign.
What this site covers
Shreveport Roof Replacement is a referral site for new roofs and full replacements only. Independent providers do the work and set their own prices. If you only need a small repair, this is not the right fit.
Talk to a provider (318) 522-7001
More homeowner guides
What Drives Roof Replacement Cost in Shreveport: questions
Why do two quotes for the same roof differ so much?
Quotes often differ because they include different things. One may list tear-off, disposal, permit and decking allowances, while another leaves them out. Material grade, underlayment and flashing can also differ. Line the quotes up item by item and ask each provider to explain any gap before you decide.
Is the permit fee part of the quoted price?
Not always. The permit and inspection range on this site is $100 – $500, and the city sets it. Some providers pull the permit and include the fee, and others pass it to you. Ask who handles it and where it appears in the written quote.
How do I know if I will pay for rotted decking?
Nobody can know until the old roof is removed. Deck board repair typically runs $300 – $2,500, depending on how much wood is rotted. Ask the provider how extra boards are priced, and get that in writing, along with a rule that you approve extra cost first.
Ready to talk?
Need a new roof? Call (318) 522-7001 to check provider availability and ask a local provider for a written quote.
No obligationTalk to a local provider
A short call connects you with an independent local provider who can answer questions and set up an estimate visit.
Talk to a provider (318) 522-7001
No obligation